Vintage Victa “Long 75dBA WARNING!” Decal Reproduction

Description

Vintage Victa “Long 75dBA WARNING” decal reproduction suit most Victa Powertorque flap.

Size: 49mm x 145mm

Feature:
– base sticker is made of special soft PVC (Polymerizing Vinyl Chloride)
– with 140micron thickness without backing paper, adhesive and laminate
– have permanent adhesive power of 18N/25mm on stainless steel after 24hr
– adhered to steel, no shrinkage in cross direction, in length 0.4mm max
– fire resistant (class DIN 4102-B1) on steel and high tensile strength of 19MPa
– UV treated sticker microporous film for long-term protection against UV-rays
– with 70micron glossy transparent laminate for added UV protection and waterproofing
– meticulously produced at high resolution vector graphics (non-scanned pixelated image)
– printed with sharp colour pigment based ink for superior UV resistance

Installation:
To safely remove the adhesive backing, stick a sticky tape on the back corner of the decal to separate the backing.
Surfaces to which the material will be applied must be thoroughly cleaned and free from dust, grease or any contamination which could affect the adhesion of the material.